RS212000

Series 120 Furler Drum

Series 120 standard continous line furler

FEATURES

Series 80, 120 & 160 furlers include a standard D shackle on the underside of the furler.

Connection posts of Series 200 & 280 furlers are compatible with shackle, snap shackle or fairlead attachment - supplied separately.

Series 200 & 280 furlers feature a fast pin to facilitate easy changeover of sails sharing a common furler set.

Quick furling line installation and removal requires no tools .

Maintenance-free bearing systems.

Full dimensioned technical drawings and user instructions can be found under the SUPPORT tab on the Ronstan website

Specifications

Product Specifications
Rope Ø (in)5/16
M.W.L. (lb)3970
B.L. (lb)7940
Weight (oz)13.5
$1,549.00

PRODUCT INFORMATION

Ronstan's Continuous Line Furlers put great performance and reliability within the reach of cruising and racing sailors alike.

ADVANCED DRUM TECHNOLOGY
The range matches drum diameters to load ratings providing the optimum balance between speed and ease of furling. Drums incorporate a machined groove profile and cross-hole geometry to grip the furling line securely. When deploying the sail the continuous furling line self-ejects from the grip zone, remaining stationary for smoother, safer operation with minimum rope wear. A PTFE perimeter strip ensures the unloaded furling line can’t fall from the drum or become snagged.

MAINTENANCE FREE BEARING SYSTEM
Furlers and top swivels feature a factory sealed, maintenance free bearing. Roller bearing sets run on hardened races for smooth high load performance.

EASY CONTINUOUS LINE INSTALLATION AND REMOVAL
The continuous furling line is easily fitted and removed from the furler, so it can be left on deck when the sail and furler are stowed below.

SECURE & FLEXIBLE ATTACHMENT OPTIONS
Furlers and top swivels have retained clevis pins and top swivels have a snag-free low profile shackle pin head. Attachment options include quick release pins, high resistance shackles, snap shackles, fairleads and torsion rope thimbles. The furling line guide can be adjusted to suit either 0° or 90° attachment, as required to match the take-off alignment and deck layout.

ROTATION STOP ACCESSORY
A compact rotation stop can be added to compatible models of furlers to ensure inadvertent unfurling of the sail doesn’t occur. The rotation stop is simply installed on the underside of the furler and can be locked out when in use, or in when the sail is furled or stowed.

Standard Furling Systems diagramStandard Furling Systems diagram

Top-Down Furling Systems diagramTop-Down Furling Systems diagram

FURLER SELECTION GUIDE

  CODE ZERO (STANDARD FURLING)
typical maximum boat size
SERIES Monohull LOA Multihull LOA Sail Area M.W.L.
Series 80 9m (30’) 8m (26’) 40m2 (430ft2) 0.95 t
Series 120 12m (40’) 10m (33’) 90m2 (965ft2) 1.80 t
Series 160 14m (46’) 12m (40’) 130m2 (1395ft2) 3.00 t
Series 200 18m (60’) 15m (50’) 270m2 (2900ft2) 5.00 t
Series 280 21m (69’) 18m (60’) 350m2 (3765ft2) 8.00 t

 

  SPINNAKER (TOP DOWN FURLING)
typical maximum boat size
SERIES Monohull LOA Multihull LOA Sail Area M.W.L.
Series 80 10m (33’) 8m (26’) 75m2 (805ft2) 0.47 t*1 / 0.95 t*2
Series 120 14m (46’) 12m (40’) 140m2 (1505ft2) 0.90 t*1 / 1.80 t*2
Series 160 16m (53’) 14m (46’) 200m2 (2150ft2) 1.50 t*1 / 3.00 t*2
Series 200 21m (69’) 18m (60’) 400m2 (4305ft2) 3.00 t*1 / 5.00 t*2
Series 280 25m (82’) 21m (69’) 525m2 (5650ft2) 5.00 t*1 / 8.00 t*2

*1 M.W.L. on swivel ring (tack load)
*2 M.W.L. on clevis pin (torsion line + tack load)

Technical Information

Materials

Grade 17-4PH forged stainless steel shackles. Grade 316 stainless steel fasteners. Grade 2205 stainless steel shaft & pins. Alloy drum, swivel jaws & line guide. PTFE perimeter strip

 

Resource Files

pdf
zip

Need some advice?

Send us a
Message

Find a
Dealer