Captive Ball Bearing

RC42260

Series 22 CB Headboard Batten Car

Headboard batten car with captive ball bearings for 22mm (7/8") track, 235mm long x 47mm wide.

FEATURES

Captive ball bearings.

Low profile.

Lightweight alloy car bodies.

Specifications

Product Specifications
Pin Ø (in)15/32
Weight (oz)28.7
$799.00

Product Information

Strength & Simplicity

Sailing professionals around the world choose Ronstan batten systems for superior and innovative features combined with race-proven performance and reliability. With 7 track sizes in the standard product range, there is a system with the right specifications for every boat and sail plan.

Flexible solutions

Captive ball bearing cars use a combination of captive recirculating ball bearings running on the face of the track for compression loads, and sliderods to provide extra strength for high static loads. All bearings are captive, allowing for easy installation and removal.

Luff groove tracks are compatible with ‘soft luff’ and fully battened mainsails, making it easy to change between the two. They may be bonded to carbon masts with special adhesives.

Quick release cars make the job easier when the sail needs to be removed for changeover, repair or stowage.

Ball joint articulation

A stainless steel ball joint link between the car and the batten receptacle provides movement in all directions with a minimum of 105° (112°for ball bearing cars) either side of centre. Ball joint links are available to suit Ronstan batten receptacles and most other types.

Installation options

Installation can be greatly simplified for Series 19 through Series 30 by the use of threaded slugs that locate in the existing luff groove of the mast, avoiding the need to drill and tap holes for fasteners and other complications. Slugs are self-locating and allow for track installation without having to remove the mast from the boat. 

Technical Information

Specification Details

Specification Details
A (in)9 1/4
B (in)1 11/32
C (in)3 3/4
D (in)21/32
E (in)1 7/8

Applications

Monohulls to 18m (60ft) or sail area 70m2 (753ft2). Multihulls to 13m (43ft) or sail area 57m2 (614ft2).

 

Materials

Alloy car body.

Torlon® ball bearings.

Grade 316 stainless steel pin.

 

Need some advice?

Send us a
Message

Find a
Dealer