#1
BACKSTAY
Endless 12:1 system that allows trimming from either side of the cockpit. Suitable for fractionally rigged boats up to 10m (33ft).
MWL = 375kg (820 lb)
Max Line Size = 8mm (5/16")
#2
BACKSTAY
Powerful 24:1 system that utilizes a double cascade to provide maximum power with minimum friction. Tail is lead out to an RF5 swivel cleat base on the cockpit floor for ease of operation from either side of the boat. Suitable for fractionally rigged boats to 12m (40ft) in length.
MWL = 750kg (1650 lb)
Max Line Size = 8mm (5/16")
#3
BACKSTAY
Popular on cruising yachts up to 11m (35ft) in length with masthead rigs, this system provides good mechanical advantage, and quick adjustment.
Max Line Size = 10mm (3/8")
#4
BACKSTAY
Stronger version of system #3 to suit mast head yachts up to 12m (40ft). A Triangular link plate is used in lieu of the ring for the 3 wire blocks.
Max Line Size = 10mm (3/8")
VARIATIONS Control line load can be further reduced by increasing the final 6:1 Orbit Block™ system to 9:1 using an RF55410 Quad block to replace the RF56310, and with an RF45201 piggy backed off the RF56330B bottom block using an RF5004-09 Dyneema® link.
#1
RUNNER
A winchless running backstay system featuring coarse and fine tune sheeting. Suitable for use on racing boats to 9m (30ft), where weight savings are critical. Cascade and fine tune tackle can be hidden below deck, false floor, or in cockpit floor ribs.
MWL = 1000kg (2200 lb)
Schematics are for illustrative purposes only - products and setup details may vary based on real-life considerations. Further details regarding product specifications and applications may be found on the individual product pages. Please refer to our Definitions & Customer Considerations and Fittings & Equipment General Guidance before selecting a product. If unsure, or for additional guidance in product selection, please feel free to contact us.
