Andersen Two and Three Speed electric winches are the perfect solution for larger boats, of 16m (60ft) or more, providing the power and control to safely hoist and trim sails of any size at the push of a button. In addition to the host of standard features that have made Andersen self tailing winches the benchmark for quality and performance, Andersen Two and Three Speed Electric Winches are engineered with unsurpassed levels of functionality, monitoring and protection.
Efficient, high quality motor At the heart of each Andersen Two and Three Speed electric winch is a powerful European engineered and manufactured series wound motor. Carefully matched with the optimum gearbox these winches deliver high speed at low load for fast sheeting in, and low speed at high load for safe, fine tuning when trimming. For maximum performance and efficiency they are supplied in a 24 volt version, providing smooth operation across a wide working load range.
Illuminated "intelligent" Push Button Two and Three Speed electric winches are supplied with push buttons with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67. The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.
Unrivalled level of monitoring and protection
Integrated Overload Protection The controller is pre-set to stop the winch if the Maximum Pull Load is exceeded. Operation can resume within a few seconds when the load returns below the limit.
Thermal Overload Protection – The motor is fitted with a thermal cutout that disables the motor in case of overheating; it automatically resets after the temperature returns to normal.
Reverse Polarity Protection – An integrated 5 Amp fuse protects the controller against incorrect cable connection.
Accidental Start Protection – Winch operation is disabled if the push button is already inadvertently pressed when the power supply is turned on at the circuit breaker or battery.
Low Voltage Detection – Operation is disabled if the battery charge level is low, which prevents further drain on batteries and avoids triggering low-voltage reset of navigation instruments and other electronic devices.
Continuous Run Time Limit – Operation is disabled if continuous run time exceeds 10 minutes.
Manual operation
Manual operation is always available as a backup; or just for the experience.
Andersen Two and Three Speed Electric Winches are supplied complete with push buttons, electrics/control box and comprehensive installation and operation instructions.
The RA590150 150A Amp Circuit Breaker is recommended for use with 82-3ST – sold separately.
Features
Drive shaft in AISI 329 stainless steel
Self-tailing arm in 316 stainless steel adjustable through 360 degrees (from size 40ST and up)
Low friction curved self-tailing arm
Stainless-steel ball bearings to carry vertical and horizontal loads from the drum (from size 52ST and up). The upper and lower bearings are designed to be maximum distance apart, resulting in increased support for the drum while increasing efficiency
Large-diameter roller bearings to absorb drum loads and increase efficiency
Easy servicing of gears. Captive pawls made from cold-pressed stainless-steel bar AISI 316L, are unbreakable
Upper base plate from aluminium bronze, which is twice as strong as standard bronze and ensures a light, stiff and rugged construction that increases efficiency
The self-tailing system adjusts automatically to suit various rope sizes. Jaws in 316 stainless steel
Lightweight grade 316 stainless-steel drum with Power Rib ensures a superior grip on the sheet without causing excessive wear
Drum surface with Power Rib generates horizontal friction, and a highly polished surface minimizes vertical friction, allowing rope to slide easily up the drum
Lightweight stainless-steel drum combined with an internal construction of aluminium bronze, results in ANDERSEN Winches being of similar weight to aluminium winchesbut far more durable. Servicing is only required every 2 years under normal use.
The Power Rib™
Andersen winch drums incorporate the distinctive Power Rib™ which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimises vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller bearings and ball bearings carry the highest drum loads to the centre stem of the winch, minimising efficiency losses due to friction.
The self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self tailing jaws adjust automatically to suit various rope sizes. Andersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so under normal use.
It’s all about protecting your investment. With ANDERSEN Winches, this protection is guaranteed, as the drum maintains its grip year after year. Keeping wear and tear to a minimum also helps maintain resale value, and our 3-year warranty and instant service in more than 30 countries worldwide amount to a benchmark standard. Low maintenance is a key — and with ANDERSEN Winches, you can take it for granted. Our winches require less maintenance, since all pawls and springs are captive, and the design of the winch allows you to easily strip it down for service and greasing.
Resource Files
Andersen Winch Product Manual - 82-3ST Electric Winch 24V
Data Sheet - 82-3ST Three Speed Electric
RA2082012200 2D Line Drawing
RA2082012200 3D Surface Model
Winch Mounting Dimension Template - 82-3ST Winch, 24V Electric - Paper size A2
We would love to keep in touch with you! Sign up to our quarterly newsletter and receive news, tips, and updates right in your inbox.
Newsletter
Our use of cookies
We use necessary cookies to make our site work. We'd also like to set optional cookies to help us improve it.
We won't set optional cookies unless you enable them.
Using this tool will set a cookie on your device to remember your preferences.
Necessary
Necessary cookies enable core functionality such as security, network management, and accessibility. You may disable these by changing your browser settings, but this may affect how the website functions.
Name
Description
PHPSESSID
Preserves the visitor's session state across page requests.
form_key
Protects visitor's data from Cross-Site Request Forgery Attacks.
guest-view
Stores the Order ID that guest shoppers use to retrieve their order status. Used in “Orders and Returns” widgets.
login_redirect
Preserves the destination page the customer was loading before being directed to log in.
mage-banners-cache-storage
Stores banner content locally to improve performance.
mage-cache-sessid
The value of this cookie triggers the cleanup of local cache storage.
mage-cache-storage
Local storage of visitor-specific content that enables ecommerce functions.
mage-cache-storage-section-invalidation
Forces local storage of specific content sections that should be invalidated.
mage-messages
Tracks error messages and other notifications that are shown to the user, such as the cookie consent message, and various error messages. The message is deleted from the cookie after it is shown to the shopper.
private_content_version
Appends a random, unique number and time to pages with customer content to prevent them from being cached on the server.
section_data_ids
Stores customer-specific information related to shopper-initiated actions such as display wish list, checkout information, etc.
user_allowed_save_cookie, cookie_consent
Stores the user's cookie consent state for the current domain.
X-Magento-Vary
Configuration setting that improves performance when using Varnish static content caching.
Preferences
Preference cookies are used to store settings and information that changes the website look and functionality.
Name
Description
store
Remembers the user's selected language version of a website.
Marketing
Marketing cookies help us provide our visitors with relevant content, browsing history, and product recommendations.
Name
Description
product_data_storage
Stores configuration for product data related to Recently Viewed / Compared Products.
recently_compared_product
Stores product IDs of recently compared products.
recently_compared_product_previous
Stores product IDs of previously compared products for easy navigation.
recently_viewed_product
Stores product IDs of recently viewed products for easy navigation.
recently_viewed_product_previous
Stores product IDs of recently previously viewed products for easy navigation.
_fbp
This cookie is installed by Facebook to store and track visits across websites.
Analytics
Analytics cookies help us understand how our visitors interact with the website. It helps us understand the number of visitors, where the visitors are coming from, and the pages they navigate. The cookies collect this data and are reported anonymously.
Name
Description
add_to_cart, remove_from_cart
Used by Google Tag Manager. Captures the product SKU, name, price and quantity added or removed from the cart, and makes the information available for future integration by third-party scripts.
dc_gtm_*
Throttles request rate when Google Analytics is deployed with Google Tag Manager.
_ga, _gat, _gid, _ga_*, _gat_*
This cookie is installed by Google Analytics. They are used to collect information about how visitors use our website. We use the information to compile reports and to help us improve the website. The cookies collect information in a way that does not directly identify anyone.
