STANDARD D SHACKLES
The standard dimensional format shackle providing high load capacity and compact size. Smaller size bodies are produced from formed stainless steel sheet, whilst larger size bodies are from turned bar, then flattened and coined at the ends. Pin heads are available in compact 'slotted' or 'coined' for finger or tool adjustment and some pin heads are drilled for the fitting of a securing wire.
LONG D SHACKLES
Similar in features to the standard D shackles, long D shackles have a longer internal length clearance for fitting to longer or irregular shaped objects with a greater distance between fixing points, such as attaching an outhaul line to a press ring on a sail.
WIDE D SHACKLES
Similar in features to the standard D shackles, wide D shackles have a wider internal width clearance for fitting to wider, irregular shaped or multiple objects. Their point load B.L. is generally lower than that of standard pin length shackles.
TWISTED SHACKLES
Similar in features to the standard D shackles, twisted shackles allow fixing of 2 objects with a 90 degree change in their orientation, such as attaching twin jib sheets to clew board.
BOW SHACKLES
Similar in features to the standard D shackles, bow shackles have a wider internal width clearance for fitting to wider, irregular shaped or multiple objects, but with a standard pin width that doesn't reduce or compromise the point load B.L.
HALYARD SHACKLES
Specifically designed for halyard applications, these shackles feature a closed eye section at the top to retain the halyard at all times and a captive shackle pin to avoid accidental dropping and loss. The halyard retaining pin is removable to allow fitting of a pre-spliced halyard eye end, and the shackle pin is engaged by a quick action pin that requires only one quarter turn to tighten or loosen, has an anti-vibration retaining lug and a long lever head for easy one handed engagement.
LIGHTWEIGHT
CLEVIS PIN SHACKLES
With lightweight formed bodies, these shackles provide the lightest weight solution for a nominal pin size, where load capacity isn't as critical. They utilise split pin securing of the shackle pin for reliable fitting without tools.
SPECIAL SLOTTED SHACKLES
Specifically designed for halyard applications, these shackles feature a closed eye section at the top to retain the halyard at all times and a captive shackle pin to avoid accidental dropping and loss. The halyard retaining pin is removable to allow fitting of a pre-spliced halyard eye end, and the shackle pin is engaged by a quick action pin that requires only one quarter turn to tighten or loosen, has an anti-vibration retaining lug and a long lever head for easy one handed engagement.
SWIVEL SHACKLES
These shackles provide full 360 degree rotation for variable alignment of the two items being linked. They have convenient pin attachment at each end and some models have ball bearings for free rotation even at high loads.
2 WAY LINKS
These items allow the alignment of two objects to be rotated 90 degrees relative to each other. They provide a convenient, more compact solution that has traditionally been addressed by linking two shackles. They also provide pivoting movement in two planes - about each of the pins.
