RCC22-2A

Series 22 Safety Rail Tandem Car with Plunger Stop, Silver

Certified to European Standard EN795-2012 Type D, European Technical Specification CEN/TS16415:2013 Type D for multiple users, and Australian Standard AS1891.2.2001, Part 2

FEATURES

Certified to meet European Standard EN795:2012 Type D together with European Technical Specification CEN/TS16415:2013 Type D, allowing for a maximum of three simultaneous users on the one system, each on an individual car.

Marine grade aluminium alloy cars, track rails and end stops, anodised for corrosion protection and long service life.

Recirculating Torlon® ball bearings for free running, low friction performance and low maintenance.

Grade 316 forged stainless steel pivoting shackles for lanyard attachment.

Rubber buffers for reduced vibration and to lift pivoting shackles away from car body for quick access.

Spring-loaded stainless steel plunger for simple, positive re-positioning at stop locations.

Can be locked in the disengaged position to allow free movement along the track rail.

The elliptical knob is easy to grip and turn, and indicates clearly whether the plunger is engaged or not.

The track rail can be mounted in either a vertical or horizontal plane.

Specifications

Product Specifications
Weight (g)504
Length (mm)254
Width (mm)58

Product Information

Track and car systems have long been used to provide a mobile attachment point for crew when cleaning the hull, superstructure and windows of large motor yachts and other vessels. With today’s greater awareness of workplace risks, boat builders and surveyors are seeking to ensure a high standard of safety by specifying systems that are purpose designed, tested and standards approved. Ronstan supports this approach, which can only improve the safety and security of the persons using these systems in their everyday work. 

 

This system is tested to the European standard EN795:2012 Type D, and the Australian Standard AS1891.2.2001, and is appropriate for single person use only. Testing for conformity to these standards is witnessed by a Recognised Organisation, member of the International Association of Classification Societies (IACS).

Technical Information

Applications

This system provides a method of attachment for use in conjunction with personal protection equipment to protect against falls from a height, such as when working outside of conventional guardrails for cleaning and maintenance purposes. It shall not be used for lifting equipment or for any other purpose.

 

Materials

Torlon® ball bearings. Anodised aluminium car bodies and track. Grade 316 shackle, plunger stop, pivot pin, fasteners and connector plate

 

Resource Files

dwg
zip
pdf

Need some advice?

Send us a
Message

Find a
Distributor