RC63221

Series 32 I-Track Car with Plunger Stop

316 stainless steel car for safety rail system with lanyard attachment point and plunger stop.

FEATURES

Strong stainless steel bodies.

Flared sides and angled ball bearing wheels provide high load capacity and smooth operation.

Cars are available in free running and plunger lock configurations with large lanyard take off points for easy attachment.

Meets the requirements of the Australian National Standards for Commercial Vessels (NSCV), Part C, Section 1, 6.17.3 (Pilot Launch – Equipment) and 6.12.7.5.6 (Clipping point strength).

Ideal for use on any vessel where the crew requires high levels of mobility to operate freely on deck, under all conditions.

Specifications

Product Specifications
M.W.L. (kg)6500
Weight (g)461
Length (mm)76
A$566.50 inc. GST

Product Information

The Ronstan Series 32 I-Track Safety Rail System is designed to provide the highest level of protection and safety for crew on commercial work boats when working on deck or outside the safety of the vessel’s cabin. The system has been tried and proven on many commercial vessels including but not limited to pilot boats, fire and rescue boats, police and military patrol boats and commercial fishing boats. The safety rail system provides a method of attachment for use in conjunction with personal fall protection equipment to protect crew against falls and overboard situations and allows freedom to move about the workboat uninhibited and with ease in any sea conditions. Thoroughly tested in the lab and in the field, Ronstan’s Series 32 I-Track Safety Rail System passes the requirements of the Australian National Standards for Commercial Vessels (NSCV), Part C, Section 1, 6.17.3 (Pilot Launch – Equipment) and 6.12.7.5.6 (Clipping point strength) .

MODULAR SYSTEM FOR EASE OF SPECIFICATION AND INSTALLATION.
To achieve greater economy with the flexibility to adapt, we have created a modular system of standard components that make it easy to design, specify and install these systems to a wide range of commercial vessels. For designers and builders, 2D drawings are available to assist and ensure it’s a Ronstan safety rail system that you next specify. Customised track rails are available for vessels where standard track rail corners are not suitable.

TRACK FASTENINGS.
M6 (1/4) countersunk fasteners at 100mm (3 15/16") cnetres. Unsupported fastening span no greater than 1500mm (59 1/16"). G316 stainless steel fasteners with a nominal minimum strength of 700MPa. Strength of substrate, backing plates, brackets must be designed to support a minimum 600kg (1320lb) load. STOP HOLES. 50mm (2") centres

Technical Information

Applications

Ideal for use on any vessel where the crew requires high levels of mobility to operate freely on deck, under all conditions.

 

Materials

Grade 316 stainless steel car bodies, wheels, bearing races and fixtures. Grade AL6061-T6 aluminium alloy track

 

Resource Files

pdf
pdf
pdf
pdf
pdf

Need some advice?

Send us a
Message

Find a
Stockist