Winch Mounting Orientation
Andersen Winches do not require a particular mounting position to achieve their maximum working loads and holding loads in normal use. However, there are some considerations to be aware of. The following PDF indicates the proper line entry angles, self-tailing arm positioning, and output drive gear orientation. NOTE: on models 12ST, 28ST, and 34ST, the self-tailing arm is fixed, so it is important to establish the proper location of the holes prior to drilling these in the deck.
Self-Tailing Winch Mounting Templates
- 12ST Manual Winch
- 18ST Manual Winch
- 28ST/34ST Manual Winches
- 40ST Manual Winch
- 46ST/50ST Manual Winches
- 52ST Manual Winch
- 58ST/62ST Manual Winches
- 68ST/72ST Manual Winches
- 78ST Manual Winch
- 82-3ST Manual Winch
Classic Winch Mounting Templates
Electric Winch Mounting Templates
- Push Button for Compact Motors™
- Push Button for E1 Single Speed, E2 Two Speed, and Three Speed Electric Motors
- Above Deck Compact Motor™: Sizes 28, 34, 40, 46, 50ST
- Above Deck Compact Motor™: Sizes 52, 58, 62ST
- Above Deck Compact Motor™: Sizes 68, 72ST
- Below Deck Compact Motor™ and E1 Single Speed: Sizes 28 and 34ST
- Below Deck Compact Motor™ and E1 Single Speed: Size 40ST
- Below Deck Compact Motor™ and E1 Single Speed: Size 46 and 50ST
- Below Deck Compact Motor™ and E1 Single Speed: Size 52ST
- Below Deck Compact Motor™ and E1 Single Speed: Size 58 and 62ST
- E1 Single Speed: Size 68 and 72ST
- Below Deck Compact Motor™ and E2 Two Speed: Size 68 and 72ST
- Andersen Winch Product Manuals.
Andersen Mounting Templates have been created at a 1:1 scale. It is critical that they are also printed at a 1:1 scale. Please check that any printed or reproduced copies match the dimensions indicated at 1:1 scale prior to use. We recommend you carefully read the relevant manual before installation and use of all Andersen products.
