Cables Fixed Length | Cables - Adjustable Length | Cables - Specialised Ballustrading | Rods - Adjustable Length 

• CABLES - Fixed Length

Swage Eye and Swage Eye cable system:

Swage Eyes. Eyes machined from Grade 316 Stainless Steel. Exact eye to eye dimension must be specified.

Swage Fork and Swage Fork cable system:

Swage Forks. Fork and fork system allowing movement in one plane only. Exact pin to pin dimension must be specified.

Swage Toggle and Swage Toggle cable system:

Swage Toggles. Toggle and toggle system allows for movement in two planes. Exact pin to pin dimension must be specified.

Thimble & Ferrule Eye cable system:

Thimble & ferrule eye system - Simple end termination for easy on-site installation. Exact eye to eye dimension must be specified.

• CABLES - Adjustable Length

Threaded Swage Terminals cable system:

Threaded Swage Terminals. Simple adjustment is obtained by adjusting nuts. Threaded swage terminals can be threaded directly into suitably threaded anchorages.

Toggle/Swage Sealoc Turnbuckle and Swage Toggle cable system:

Toggle/swage turnbuckle and swage toggle. Turnbuckles provide excellent adjustment from one point and are available in Sealoc, Seafast and Commodity Grade styles. Swage toggles have the same toggle ends as turnbuckles for uniformity and aesthetics.

Toggle/Swage Seafast Turnbuckle and Swage Toggle cable system:

System as above with Seafast turnbuckle in lieu of Sealoc turnbuckle. Note - Toggle shown in side elevation.

Toggle/Toggle Turnbuckle and Thimble & Ferrule Eye cable system:

Toggle/toggle turnbuckle and thimble & ferrule eye. System designed for ease of installation with minimum on-site assembly. Toggle/toggle turnbuckles have clevis pins for easy connection. Fork/fork turnbuckles are also available.

• Cables - Specialised Balustrading

Swage Terminals Balustrade system:

Swage terminals tensioned with threaded terminal adjusters.

Microloc Turnbuckle Body/Microloc Swage Terminal Balustrade system:

Microloc Turnbuckle body/Microloc swage terminal and Microloc swage fork with anchor bolt connections.

Sealoc Toggle/Swage Turnbuckle and Swage/Toggle Balustrade system:

Sealoc toggle/swage turnbuckle and swage/toggle with welded lug connections.

Threaded Swage Terminals Balustrade system:

Threaded swage terminals, tensioned by external nuts.

Sealoc Toggle/Swage Turnbuckle Balustrade system:

Sealoc toggle/swage turnbuckle each end for extra tension on longer runs with anchor bolt connections.

Seafast Toggle/Toggle Turnbuckle and Thimble & Ferrule Eye Balustrade system:

Seafast toggle/toggle turnbuckle and thimble/ferrule eyes with saddle connections.

Seafast Fork/Fork Turnbuckle Balustrade system:

Seafast fork/fork turnbuckle and thimble/ferrule eyes with pad eye connections.

• Rod - Adjustable Length

Threaded Rod with Spanner Flats and Threaded Fork Ends rod system:

Threaded rod with spanner flats and threaded fork ends. Tension is achieved by utilising the spanner flats to rotate the bar. Supplied with aesthetic conical lock nuts and double headed pins. Available in bar sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm).

Threaded Rod with Spanner Flats and Threaded Eye Ends rod system:

Threaded rod with spanner flats and threaded eye ends. Tension is achieved by utilising the spanner flats to rotate the bar. Supplied with aesthetical conical lock nuts and threaded eye ends. Available in sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm).

Threaded Rod with Central Joiner rod system:

Threaded rod with central joiner; required for rod lengths in excess of 6m (18ft). Note - can be supplied with turnbuckle body for additional adjustment. Available in sizes 3/16 in. (4.8mm) to 1 1/4 in. (31.8mm).